Home | About us | E-Mail | Contact
 
 
 
 
 
 
 
 
5. Micro production

MICRO PRODUCTION SECTION

 

Micro production section is composed of two compartments:

  1. Research Group - Advanced Technology Design
  2. Mechanical Processing Shop

 

Research Group - Advanced Technology Design

The group was created to apply in production the results of technological researches gathered during the Institute's projects.

Are applied in production the results of researches regarding manufacturing processes for complex shaped forms and low rigidity parts (rotor, stators, cases) in order to obtain special chip removal regimes for higher productivity with lower consumption of tools and manual labor.

Processed materials are of a wide variety, starting from aluminum alloys, alloyed and high alloyed construction steel types up to titanium alloys.

There is also large experience in manufacturing high speed sliding bearings made of YSn type anti-friction alloy coated through centrifugal casting.

The software used for programming and simultaneous mechanic processing (CAM) is UNIGRAPHICS NX 4, logged data being the solid model supplied by research-design compartments.

The connection between programming compartment and tool machines is made through data transfer internal network.

MICRO PRODUCTION SECTION
MECHANICAL PROCESSING SHOP
MACHINES DIVISION - NUMERIC CONTROL TOOLS

EE 320  CNC numeric controlled horizontal lathe -1 piece

· CNC - Hunor PNC 721;
· Part's maximum length - 750 mm;
· Maximum processing diameter - 320 mm

 

SD 610  CNC numeric controlled horizontal lathe -1 piece

· CNC - NCT;
· Part's maximum length - 1000 mm;
· Maximum processing diameter - 610 mm;

 

Carusel SC 14 - CNC Vertical lathe- 1 piece.

· CNC - Heidenhain;
· Faceplate diameter - 1250 mm;
· Z axis stroke - 1500 mm;
· Maximum processing diameter - 1400 mm

 

Dahlih MCV 1250 B 5 axis vertical milling machine- 1 piece.

· CNC - Fanuc 18i - MB;
· Machine's table : 1400x820 mm;
· X stroke - 1250 mm;
· Y stroke - 650 mm;
· Z stroke - 700 mm;
· C stroke - 360 dgr;
· A stroke ± 110 dgr;

Forest  - Line 5 axis milling machine- 1 piece.

· CNC - Engelhardt Serie 8800;
· Machine's table: 2000 x1300 mm;
· X stroke - 2000 mm;
· Y stroke - 1500 mm;
· Z stroke - 1000 mm;
· C stroke ± 170 dgr;
· A stroke ± 110 dgr;

 

Forest - 3 axis milling machine- 1 piece.

· CNC - Bosch;
· Machine's table: 1250x500 mm;
· X stroke - 1000 mm;
· Y stroke - 550 mm;
· Z stroke - 400 mm;

 

FNF - 40N 2.5 axis milling machine- 3 pieces.

· CNC - Hunor PNC - 732;
· Machine's table: 800x400 mm;
· X stroke - 550 mm;
· Y stroke - 360 mm;
· Z stroke - 290 mm;

 

HOME | ABOUT US | E-MAIL | CONTACT
Web design : Dezibel Media | Hosting and maintenance: INCDT COMOTI Institutul National de Cercetare Dezvoltare Turbomotoare INCDT COMOTI, Institut National, INCDT COMOTI, COMOTI, Cercetare, Dezvoltare, Inovare, Turbomotoare, Compresoare, laborator, laborator mobil, statie mobila, acustica, vibratii, analiza vibratii, analiza acustica, analiza FFT, FFT, comoti, comoti.ro, www.comoti.ro, INCDT, INCDT COMOTI, laborator de acustica, laborator de vibratii, laborator de acustica si vibratii, diagnoza zgomote, zgomote, analiza zgomote, spectre, spectru, cepstru, analiza frecvente, frecvente, diagnoza, diagnoza acustica, diagnoza vibratii, diagnoza sunete, diagnoza zgomote, monitorizare, monitorizare acustica, monitorizare vibratii, monitorizare zgomote, harti acustice, cartografiere acustica, cartografiere zgomote, realizare harti acustice, masurari acustice, masuratori acustice, masurare acustica, masurari vibratii, masuratori vibratii, masurari vibratii, masurari zgomote, masuratori zgomot, masurare zgomot, proiecte acustica, proiecte vibratii, proiecte zgomot, cercetare acustica, cercetare vibratii, cercetare zgomot, cercetare si dezvoltare, dezvoltare acustica, protectie acustica